CHEVRON MOTOR OIL API SG / CD SAE 20W-50

Home » CHEVRON MOTOR OIL API SG / CD SAE 20W-50

CHEVRON MOTOR OIL API SG / CD SAE 20W-50

Oil Categories:

SAE Grade: 20W-50

Standards: API SG / CD SAE 20W-50

API: SG / CD

Approvals:

Application

Passenger car and light truck gasoline engines where oils of up to API SG performance are required. Industrial and marine applications of passenger car type gasoline engines where oils of up to API SG performance are required.

Car Mileage (km)	200000 - 300000
Oil Mileage (km)	3000 - 3500
Kinematic Viscosity, mm2/s @ 40°C	160.5
Kinematic Viscosity, mm2/s @ 100°C	17.7
Viscosity Index
Sulfated Ash, %m/m	0.77
Phosphorous, m%	0.1
Total Base Number (TBN)	5.2
Flash Point, °C
Pour Point, °C

Quality engine oil for use in a wide range of older passenger car and lightduty commercial vehicle gasoline engines where API SG or lower performance lubricants are required and SAE 20W-50 viscosity is acceptable. Proven metallo-organic anti-wear additive system resists wear under all operating conditions by forming a protective layer on contact surfaces. Multigrade viscosity provides additional protection against wear at start-up and under high temperature operating conditions. Metallic detergent and ashless dispersant additive system preserves power and performance by providing good control of piston and ring deposits. Good thermal and oxidation stability resists in-service oil degradation that contributes to filter blocking and sludge formation.