Mirage MR-HP-172 275/45 R20
The Mirage MR-HP-172 275/45 R20 is a wide XL tyre size within the MR-HP172 road-performance range for crossovers and luxury SUVs.
Related Products
MR HP-172 275/45 R20 is Recommended for Following Cars
The Mirage MR-HP-172 275/45 R20 is a wide XL tyre size within the MR-HP172 road-performance range for crossovers and luxury SUVs. Mirage's published specifications identify this exact version as 275/45 R20 110V XL. The tyre combines a 275 mm section width, a 45 aspect ratio, radial construction and a 20-inch rim diameter.
The MR-HP-172 uses an asymmetric tread arrangement designed to support different functions across the tyre. Wide circumferential grooves provide water-evacuation channels through the tread, while the outer rib and shoulder structure is intended to support cornering stability and road grip. Mirage also specifies a silica-enriched tread compound that is designed to maintain wet and dry traction while contributing to reduced rolling resistance.
275 mm Width with a Taller 45 Profile
The 45 aspect ratio gives the 275/45 R20 a nominal sidewall height of approximately 123.8 mm, calculated as 45 percent of its 275 mm section width. This gives it more sidewall than the 275/40 R20 version while retaining the same nominal tyre width and 20-inch rim diameter. The resulting overall diameter is therefore different, making the two sizes separate fitments rather than direct substitutes.
For Pakistani SUV and crossover owners whose vehicles are approved for 275/45 R20, this size provides the MR-HP-172 tread design in a broad 20-inch configuration. Its water channels are designed to support wet-road drainage, while the outer tread structure contributes to controlled paved-road handling. Vehicle approval remains essential because tyre width, sidewall height, overall diameter and wheel fitment all affect clearance and driving characteristics.
Mirage publishes this size as 110V XL. Before fitting, buyers should verify the load index, speed symbol and XL designation on the actual tyre and confirm that they satisfy the exact vehicle's requirements. Wheel width, suspension clearance and overall diameter must also be suitable. Inflation pressure should always follow the vehicle manufacturer's cold-pressure recommendation, while regular pressure monitoring, alignment and tread inspection help preserve even wear and predictable road behaviour.
MR HP-172 Technology
Asymmetric tread pattern. The MR-HP-172 uses different tread zones across the tyre rather than a symmetrical layout, allowing the inner and outer sections to perform different road-handling functions.
Wide circumferential grooves. Longitudinal channels running around the tread provide direct pathways for moving water away from the contact area, supporting wet-road drainage and reducing water build-up beneath the tyre.
Outer straight rib and shoulder design. Mirage uses a more stable outer tread area designed to support cornering grip and directional control during paved-road driving.
Silica-enriched tread compound. The MR-HP-172 uses a silica-enriched rubber compound developed to support traction on both wet and dry road surfaces while contributing to reduced rolling resistance.
Road-focused performance construction. Mirage positions the MR-HP-172 for crossover and luxury SUV applications where steering stability, paved-road grip and controlled road behaviour are key requirements.
XL construction in these sizes. The 255/55 R18, 255/55 R19, 255/50 R20, 275/40 R20 and 275/45 R20 versions covered here are published as XL specifications, although their individual load indexes and speed ratings differ.
Radial construction. All of these MR-HP-172 sizes use radial construction, represented by the R designation in the tyre size.
MR HP-172 Features
- Asymmetric road-performance tread pattern
- Designed for crossover and luxury SUV applications
- Wide circumferential grooves for water evacuation
- Tread design focused on wet-road drainage
- Outer rib and shoulder structure for cornering stability
- Road-focused steering and handling characteristics
- Silica-enriched tread compound
- Compound designed to support wet-road traction
- Compound designed to support dry-road traction
- Reduced rolling-resistance focus
- Radial tyre construction
- XL construction on all five sizes covered here
- Size-specific load index and speed ratings
- Fit only to manufacturer-approved vehicle specifications
- Wheel width and clearance must suit the exact tyre size
- Load index and speed rating must meet vehicle requirements
- Inflation pressure should follow the vehicle manufacturer's specification
- Regular pressure, alignment and tread checks are recommended
Available Sizes in MR HP-172
Understanding Tyre Size 275/45 R20 / How to Read Tyre Size
Vehicles with 275/45 R20 Tyre Size
What does 275/45 R20 mean?
275/45 R20 is the tyre size.
275 is the maximum width of the tyre in milimetres(mm). When the vehicle is fully loaded its width can expand maximum upto 275 milimetres(mm).
45 is the ratio among width and height of the tyre from its rim. it means that the height of the tyre is precisely 45% of the 275mm. Lower ratio improves road grip, but it reduces comfort to some extent.
R – refers to the method the tyre is produced. The letter “R” is found on all modern car tyres. It indicates the radial structure of tyre cosntructed with steel wires.
20 represents the diameter of the rim. It is a measurement in inches(“). This number should be rememberd as it is the measurement of the rims. It has to match exactly to what is mentioned in the car manual.
