Mirage MR-HP-182 245/35 R19
The Mirage MR-182 245/35 R19 is a low-profile passenger-car tyre developed for dry and wet road performance, high-speed stability, driving comfort and tread durability.
Related Products
MR-HP-182 245/35 R19 is Recommended for Following Cars
The Mirage MR-182 245/35 R19 is a low-profile passenger-car tyre developed for dry and wet road performance, high-speed stability, driving comfort and tread durability. Mirage officially lists this exact size as 245/35 R19 93W. The tyre combines a 245 mm section width, a 35 aspect ratio, radial construction and a 19-inch rim diameter, creating a wide and distinctly low-profile road fitment for vehicles specifically approved for these dimensions.
The MR-182 uses four wide longitudinal grooves together with lateral grooves, fine sipes and shoulder blocks to manage water across the tread. Mirage states that this combination provides effective water evacuation from the contact area, supports wet-road grip and contributes to stability during higher-speed cornering. A jointless nylon band increases tread rigidity and uniformity, while the silica-based tread compound maintains useful elasticity at the road-contact area and contributes to reduced rolling resistance.
Low-Profile 19-Inch Performance Fitment
At 245 mm wide with a 35 profile, the tyre has a nominal sidewall height of approximately 85.8 mm, calculated as 35 percent of the section width. Combined with a 19-inch wheel, this creates a very low-profile tyre package. Correct wheel width, overall diameter and suspension clearance are therefore particularly important, as another 19-inch tyre cannot be treated as interchangeable simply because it uses the same rim diameter.
For Pakistani driving, the MR-182 245/35 R19 is relevant to vehicles already approved for this performance-oriented size. Its water-evacuation system supports wet-road use, while the reinforced tread structure and shoulder design are intended to provide stable paved-road handling. Mirage also incorporates a dedicated rim-protection feature to help protect the wheel from contact with kerbs.
Mirage officially lists the 245/35 R19 MR-182 as 93W. Before installation, buyers should verify the load index and speed symbol on the physical tyre and confirm that the vehicle manufacturer approves this specification. Wheel width, overall diameter, clearance and load requirements must all be suitable. Cold inflation pressure should follow the vehicle manufacturer's recommendation, with regular pressure, alignment and tread inspections particularly important for a low-profile tyre.
MR-HP-182 Technology
Four wide longitudinal grooves. The MR-182 uses four major circumferential channels designed to move water efficiently away from the road-contact area and support wet-road grip.
Lateral grooves and fine sipes. Side grooves combined with fine tread sipes provide additional drainage routes and gripping edges across the tread.
Shoulder block design. The shoulder blocks work together with the groove system to support stability during cornering, including at higher road speeds.
Jointless nylon band. A seamless nylon reinforcement increases tread rigidity and uniformity, helping the tyre maintain stable behaviour as road speed increases.
Silica-based tread compound. Mirage uses a tread compound based on silica to maintain useful elasticity within the road-contact area while contributing to reduced rolling resistance.
Water evacuation system. The combination of longitudinal grooves, lateral channels and fine sipes is designed to move water away from the contact patch and support wet-road traction.
Rim protection feature. A dedicated protective section around the rim area is designed to help protect the wheel from damage caused by contact with kerbs.
Road-performance construction. Mirage positions the MR-182 around dry and wet grip, driving comfort, high-speed stability and long service life.
Radial construction. The 245/35 R19 uses radial construction, represented by the R designation in the tyre size.
MR-HP-182 Features
- Passenger-car road tyre
- Dry-road grip focus
- Wet-road grip focus
- Four wide longitudinal grooves
- Lateral water-evacuation grooves
- Fine tread sipes
- Efficient water drainage from the contact area
- Shoulder blocks designed to support cornering stability
- High-speed stability focus
- Jointless nylon reinforcement
- Increased tread rigidity and uniformity
- Silica-based tread compound
- Compound designed to maintain tread elasticity
- Reduced rolling-resistance focus
- Driving-comfort focus
- Long service-life focus
- Dedicated rim-protection feature
- 245/35 R19 officially listed as 93W
- Radial tyre construction
- Fit only to manufacturer-approved vehicle specifications
- Load index and speed rating must meet vehicle requirements
- Wheel width and clearance must suit the exact tyre size
- Inflation pressure should follow the vehicle manufacturer's specification
Available Sizes in MR-HP-182
Understanding Tyre Size 245/35 R19 / How to Read Tyre Size
Vehicles with 245/35 R19 Tyre Size
What does 245/35 R19 mean?
245/35 R19 is the tyre size.
245 is the maximum width of the tyre in milimetres(mm). When the vehicle is fully loaded its width can expand maximum upto 245 milimetres(mm).
35 is the ratio among width and height of the tyre from its rim. it means that the height of the tyre is precisely 35% of the 245mm. Lower ratio improves road grip, but it reduces comfort to some extent.
R – refers to the method the tyre is produced. The letter “R” is found on all modern car tyres. It indicates the radial structure of tyre cosntructed with steel wires.
19 represents the diameter of the rim. It is a measurement in inches(“). This number should be rememberd as it is the measurement of the rims. It has to match exactly to what is mentioned in the car manual.
